R/C Tech Forums - View Single Post - Tune With Camber Links
Thread: Tune With Camber Links
View Single Post
Old 02-08-2013 | 05:38 PM
  #1177  
bds81175's Avatar
bds81175
Moderator
iTrader: (20)
 
Joined: Jan 2011
Posts: 2,745
From: Litchfield, Minnesota
Default
Originally Posted by Johnnysplits
fredswain- Got a quick question. I built a spring pressure test rig. Positive stops adjusted to compress spring down 3/4 of height. I took measurements on 4 pair of AE big bore springs; 2 fronts & 2 rears. Here are the results:
Front white: 3.24/3.46, blue: 3.84/3.73
Rear white: 3.09/3.06, black: 2.80/2.80
Only one pair of the lot are matched. How critical is it to have matched pairs left and right?
You might want to do a guage study on your test jig. Fixturing of the spring and differences in the measurement process could also lead to the results you are seeing.
bds81175 is offline  
Reply