I run a Serpent S120LT and am looking to see if the OP12C.1 will work with it or if I need to just order the updated chassis from Serpent. The only difference between S120LT and S120LTX is the thickness 2.5mm vs 2mm and the LTX moved the pivot point 8mm forward. Thanks again guys!
P.S. I see a lot of the On-Point w/ Serpent on their shirts. Yet when I check out the setup sheets I only see Associated front ends used. Why is this?
Last edited by SNIPR; 02-06-2013 at 10:15 AM.