Ae Sc 10 4x4 Set up !!!!


Intended for Scotty Ernst Show Down next week at TRCR ...
Of interest is the lack of ballast weight being used ...

Shocks used are Ae Team edition 13mm

front
1.2 piston , Ae 32.5W oil ,yellow spring , zero internal limiter

Location Middle on tower, outside on arm
Camber location =inside on shock tower 2mm spacer under stud
zero unscrew shock eyelet
8mm external limiter, emulsion bladder
rear hole on steering rack

yellow sway bar


rear

1.2 piston , Ae 30W oil, zero internal limiter, Yellow spring, zero internal limiter, emulsion bladder

Location = middle on tower , inside on arm
Camber location = inside on tower
7mm spacers under stud, C-Hub mod..
zero unscrew shock eyelet
8mm external limiter
3+2 Toe block

blue sway bar

saddle packs Reedy 60C
zero ballast weight
30K front diff
7K rear diff

20T pulley Front & Rear


Track Conditions
Indoor clay , med high traction , smooth

Lrp FLOW ESC
Reedy 4.5 550 Sonic, 12T pinion
Clicker locked
Ae Vts slipper
JConcept Bar Codes (Gold)

24mm ride height , 23 mm if traction is high or rolling over...

Post # 324