Originally Posted by
EricW
This was pretty spot on with my buggy and the big bores.
- I had to move the battery all the way back to get the rear end planted better although I eventually moved the battery up just a bit because I was getting a good amount of push when cornering with it all the way back.
- Also moved to softer springs up front and added a bit of weight as well.
- Removed the washers from under the front and rear camber links.
I'll see how it feels on Wednesday, I might go with lighter shock oil up front if I still get too much push.
Thanks for the suggestions and thanks to Alex for helping me work on the buggy today at the track.
I have been running box stock b4.2 shock setup and found it to work great.. Running 1.6 pistons all around with 3 limiters up front, 2 in the rear. 30wt. Oil all around and hubs forward in the rear. Black springs in front and white rear. Outside hole on rear hubs. Shocks inside on top and outside on bottom up front and rear. I have weight in each front triangle and 1 weight in front of receiver as well. Hope this helps you. I have tried running Alex k's setup in my car and it just didn't agree with my driving style. He's in another world anyways.. I also noticed some of you guys were running beams.. I found those tires to be too soft and give me very little side bite as they do have a high sidewall and with the traction at RCHR, they tend to fold over.. I have been running v1 barcodes all around in green compound.. Good luck