Originally Posted by
mdowney
Yeah, I see that on the CRCRC setup sheet. So what is Brandon talking about with the narrow track width. I thought that could only be changed through the caster block...
When you flip the inserts around, hole closest to then center of the car it moves the caster blocks out. Flipping the insert moves the caster block the other way. So Tebo is running the hole farthest from the center of the car which narrows the front end but he is running the RB5 axles in the front with the wider hex than the stock piece so he is pushing the wheels back out. I am not a suspension genus so I can't tell you what it does.