R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 01-21-2013 | 01:09 PM
  #39116  
AdrianM's Avatar
AdrianM
Tech Champion
iTrader: (4)
 
Joined: Aug 2001
Posts: 6,101
From: Saint Petersburg, FL
Default

Originally Posted by DesertRat
NOOOOO, Do NOT go to 100mm of rollout in BOOSTED 17.5, the car will be a dog or burn up. If you have the murfdog 17.5, which I think is the same as a Reedy 17.5, and the LRP Stock Spec V2 ESC at full song on boost, gear about 70mm of rollout with neutral timing on the endbell, whatever comes as stock and reads zero. Set Torque/Feel at about a 3 or 4, five really only generates more heat, and in order to get more boost into the motor you will have to gear DOWN, not up, to get more boost as the LRP boost is RPM based, more RPM means more boost. I have run nearly this exact combination of ESC settings and spec motor, and it can run hard and pull RPM a long way, but it's not intuitive as saying 'gearing up gives you more heat and top end speed'.
Sorry, I missed the Boost part. All we run around here is blinky.
AdrianM is offline