R/C Tech Forums - View Single Post - Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
Thread: Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
View Single Post
Old 01-13-2013, 07:27 AM
  #42996  
jayhawknavy02
Tech Regular
iTrader: (2)
 
jayhawknavy02's Avatar
 
Join Date: Aug 2012
Location: San Diego
Posts: 280
Trader Rating: 2 (100%+)
Default
If anyone is installing the RX8 and went to install the adapter for the motor mount and need to get the tabs for Pro-4 to sit level no need to use the larger set of holes on the motor. The SCTE screw are 3mmx10



Solution

All you have to do it take the front end bell screws out, and rotate it. then when you have the desired hole size where you want it, screw it back together. my pro 4 has the leads right at the top.

Hope that helps anyone installing one for the first time.
Last edited by jayhawknavy02; 01-13-2013 at 08:05 AM.
jayhawknavy02 is offline  
Reply