Check hinge pins if there not bend.
Swap suspension arms to see if it switches to the other side.
If so it is the arms fault, if not, loosen both front and rear suspension blocks and rear to the right and front to the left and tighten.
After that check again.
regards Roy
Originally Posted by
Mechintosh
Is there a way to adjust rear toe individually? My car has rear toe in on the left at 2.5 and the right is 2.0. How do I adjust both to 2.0 or 2.25 maybe. Is there enough slop in the screw holes to finagle the hinge pin blocks?