Hi maxpwer.

This might be a good starting point.

Front:
Tamiya Blue
60wt 3hole
2 o-rings in bladder
2mm inside link
-1d camber
A/A blocks with arms all the way back.
Outer hole on tower outer on arm
Inner Ackerman on knuckle
Front one-way
Takeoff cs27
Role Center : low.
no kickup.

Rear:
Tamiya yellow
40wt 3 hole
-2d camber
low roll Center
Longest upper link
A/C blocks (2.5d toe in.)
Arms all the way back
Outer hole on lower arm and shock tower.
cs27
no antisquat