R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 01-04-2013 | 01:40 PM
  #26845  
Jmuck69's Avatar
Jmuck69
Tech Champion
iTrader: (14)
 
Joined: Jan 2010
Posts: 5,061
From: Atlanta, GA.
Default
Originally Posted by LOSI123
Anyone got a good setup for bigbores with avid springs and a shorty?
Mine seems to jump nose up no matter what i do
I'm running the Avid 2+2 pistons (1.5mm + 1.1mm) with 30wt frnt & 27.5wt back with either yellow/yellow or yellow/white Avid springs. I run my shorty lipo even with the front of the u-brace. I also run the AE ballast weight in the back and 1/2oz in the front (by the servo). jumps pretty level and then use brake/throttle to control in air.
Jmuck69 is offline  
Reply