Originally Posted by TheRockman

OK here is the deal:

Have a Tekin RS in my XXX-SCT with a 8.5 Tekin motor hooked to it. Had it running with a DX3R and a 3100 receiver. 2S 5000 battery. I changed over to a Radiopost radio and a 5ch receiver. Everything still working fine at this point. Now I plug up to my Hotwire and start downloading new software for the RS and tweaking the settings. Again everything still working to perfection.

I now realize I am supposed to be using my 17.5 motor instead of the 8.5. No problem...I have connectors in line so I can switch between motors. I do this and rehook to the Hotwire and continue to tweak my settings. Well now I save the settings and unhook and voila! no sound from the system and the motor does not spin. The lights on the esc look normal and function normal but no output to the motor. I have updated the esc two more times to no avail...

Any help? Any ideas? Thoughts suggestions....I got a brand new RS Pro on the way but still want to get this one working if possible.