R/C Tech Forums - View Single Post - How to solder correctly (a not so brief lesson)
Thread: How to solder correctly (a not so brief lesson)
View Single Post
Old 01-03-2013 | 05:00 PM
  #342  
marine6680's Avatar
marine6680
Tech Regular
iTrader: (2)
 
Joined: Feb 2009
Posts: 479
Default
Originally Posted by shagino
The TrakPower TK950 = Hakko 936 right? I bought a 5.2 tip form amain and the tip falls straight out. The list of irons supported says 936. Is there an adaptor that I need or did I get the wrong tip?

This is the one I got:
http://www.amainhobbies.com/product_...ide-Chisel-Tip
Unless its obviously smaller than the hole, then it should be it. The set screw should hold it.

Hakko offers two different irons for the 936, the normal one, and a larger one.

The TK950 comes with the larger one.
Last edited by marine6680; 01-13-2013 at 01:58 AM.
marine6680 is offline  
Reply