Originally Posted by
Nexus
The issue has more to do with the temp sensors built into some motors like Novak. This thread has the answer somewhere...I'll have to find it. Basically if there was an issue with the ESC cutting off and giving a temp warning people were cutting the 2nd wire of the sensor cable to disable any temp readings.
Edit:
Check to see if that Novak motor has a temp sensor. If it does you will have to disable the 2nd wire from the left on the sensor cable. Speed Passion is looking into this issue and the possibility of a software update to resolve it. In the mean time, you can disable, cut, pull out, that 2nd wire and it will disable the temp readings and you'd be fine.
I got my SP Certix in from AMain today so I need some clarification. When you say 2nd wire from left, is that on the motor or looking at the ESC?