Hey Guys,
Just curious if anyone has had issues with their cars...
I've had MASSIVE handling issues since building mine. Recently I shelved it, but decided to strip it right down and start from scratch.
So, with a bare chassis it sits nice and flat on a board. With bulkheads, same. Install topdeck (Which is new), and the chassis is bowed (The middle, between the front and rear bulkheads sits off the board around 0.5mm, enough to slide a 150mm steel rule under). The topdeck has the same hole centres as my old one. Its as though its 0.5mm or so to long, or the chassis is not drilled correctly. The bulkheads all looked fine (not bent, holes seemed to be in the same places)
Any help would be appreciated. As said, car has handled off since its first run.
I have emailed TOP Australia, and its a bad time of year to be emailing anyone, so thought I would ask here in the meantime.
Cheers
Phill