Originally Posted by
bvoltz
Ok... Here is what I have, let me know if I have a reasonable understanding...
I can pick the center of the car 2mm before the tires come off the setup board.
I have RH front 3.5, center 3mm and 3.5 Rear.
Before I made the above adjustments I had 4mm and the car was flat... 3.5mm at all 3 points....
I'm trying to learn....
I would raise your center to 3.5, then you will have 1.5mm of droop. Try that first then try it with the .5mm of chassis sag and see if you notice a difference. I dont run crc cars but i normaly run 1.5mm of droop in the slower classes and 1mm in mod. You will have to do some testing to see what works for you.