Originally Posted by
gogi108
have posted in elec off road thought i'd put it here as well . cheers
Originally Posted by gogi108
hi all , i recently bought a secondhand 2.1 60amp and its got some problems , hope someone has some ideas what it might be . what happens is it seems to have a delay in throttle and steering signal intermitantly but regular . hard to pinpoint but it feels dangerous . ive recalibrated to radio several time re installed firmware tried 2 different motors servo's and rx all with the same result . i installed one of my known xerun 2.1 esc into the exact same combo and works perfect . any ideas ? cheers
some info i forgot to add . the combo seems to work fine within a few metres of the tx but if it gets more than 5 or 10 metres the throttle steering delay is there . does anyone here have experience with bec glitchbuster setups . ive never had any problems with my xerun stuff except this one . any help greatly appreciated . cheers
__________________
hi more info , maybe Angelo could reply . today i tried upgrading another one of my 2.1 esc's to 930stock from 508stock which was working perfectly yesterday and now it is doing exactly the same thing as the secondhand speedy above . whats going on ??? i have run 930 stock earlier in the year with no problems . i believe i was using 1.64 interface to do all the firmware changes ect . i never had a problem . my computer died ealier in the year and with it 1.64 .
ive now downloaded 3.2 and updated the lcd box maybe this is where ive gone wrong .
heres the setting
lcd
hardware HW310 V1.0
software V 1.08_120504
car esc
hardware HW 427_V 1.0
software V 3.0_110930stock
please help me this is really annoying .
regards gopes