Jerad8

iTrader: (114)

SOLD

**SALE PENDING with Alky350**

For sale (No trades). SC10 Factory Team 2wd roller. Truck only has less than 10 race nights of use on roller. Truck is super clean and fresh. Shocks were just rebuilt with new seals and oil, and tranny and diff were cleaned, diff has sanded and polished diff rings and thrust rings, Diff is SMOOTH! Have the original manual, 81/84 spurs, body, misc parts. Comes with new front/rear a-arms, new body mounts, rear sway bar kit, factory team front/rear spring kits (all springs had the top of the springs grinded down to reduce the springs rubbing on the shock bodies when the shocks get compressed). The servo saver was glued and also has proline rear 12mm hex adapters.

Included Tires and wheels: All wheels are the Proline Yellow Renegade wheels for the sc10, fronts are bearing style and rears are 12mm hex style.
2 pairs of NEW rear wheels.
1 pair of front and 1 pair of rear used (actoned) wheels.

Tire pairs mounted on rear wheels:
-Jconcept Subcultures (green) Jconcept foam, 95%+ tread left
-Aka Enduro (ss) red aka foam, 75% tread left
-Aka Gridiron (ss) red aka foam, 75% tread left
-AKA Gridiron (s) red aka foam, 85% tread left

Tire pairs mounted on front wheels:
-Aka Gridirons (s) black aka foam, 90% tread left
-Aka Enduro (s) black aka foam, 95% tread left
-Aka Cityblock (s) black aka foam, 80% tread left
-Proline Slicer SC (m2) proline foam, 95% tread left

This is a roller (no electronics included).

SOLD $190-FIRM-Shipped (Continental US) SOLD

Let me answer your first question "Yes I am still FIRM on the price"

Let me answer your second question "No I wont take $170"