Originally Posted by
OfnaJoe
I have a Team Durango DESC410R with a Mamba Max Pro and a Tekin Pro4 4600 motor and a Castle BEC. When I use my Maxx Amps 6000 mAh pack it is awesome, when I put my new nano-tech 5100 mAh packs in it dies at WOT.
I can pull out easy and it's good, when I nail it it goes up to about 90% and dies, everything shuts down like you hit the off switch? The nano-tech say 130C, I doubt that but they still should not cut out. I can set throttle EPA to 85% and it runs fine, then after about 3 min. turn the EPA to 100% and it's fine. The ESC is wide open with a 10% start setting=almost wide open.
Any ideals?
Thanks joe
I had the exact same problem using a MMP and a Trinity 4XS. The speedo just can't handle the load that the motor is demanding. I used the same batteries, motor, gearing, etc... and only changed the ESC. Problem solved instantly. The other ESC is allowing 10 more amps to be delivered to the motor (per my EagleTree data logger).