Originally Posted by
Michael_T
Anyone have any issues lining up a Nova Keep On 100%?
I can't put any more shims behind the cone, as I will not have enough gap left to play with.
But it looks like 1st/2nd gear spurs are spaced alittle wider than 1st/2nd gear pinions - there seems to be an excessive gap between the spur gears.
Pinions are on correctly - just to confirm, the 1st gear pinion number faces outwards, whilst the 2nd gear pinion number faces the engine.
Try turning your 2nd gear pinion around so the numbers on both face outwards, gives a slightly wider spacing on the pinions.
Also check the one way bearing is pressed in properly in 1st gear housing, have had one that wasn't quite right.......