R/C Tech Forums - View Single Post - Slash 4x4 buggy FS
View Single Post
Old 11-22-2012, 10:12 AM
  #1  
NitroFinatic93
Tech Apprentice
iTrader: (1)
 
Join Date: Jul 2010
Posts: 51
Trader Rating: 1 (100%+)
Exclamation Slash 4x4 buggy FS

Hey guys, this is my slash 4x4 that I converted to a buggy. Ordered it off Towerhobbies back in august, then ordered all the parts from amainhobbies and started the conversion. Its had 3 packs through it. The NiMH twice, and a lipo once. I have driven it through grass and gravel, so the chassis has minimal wear. Although the proline badlands somehow got gravel in them... I put quite abit of time into setting this buggy up. It drives really well, much better than a stock slash 4x4. Jumps stupidly well actually, and handles like its on rails. I did some suspension tuning, with different mount positions, different springs and oil (Losi springs & oil). Everything works perfectly on it. The motor never got hot. I took off the front and rear bearing carriers, as well as the steering hubs, and installed blue STRC aluminum parts. I also got blue STRC aluminum shock towers, which are no longer installed because they don't look right with the buggy setup. Cut down the front and rear bumpers so they looked right, and held in the suspension pins. I cut a small hole in the chassis to fit the lipo wires, since they come out of the side of the packs. All the stock parts that I took off are still in brand new condition, and will come with it. I also got a set of black RPM a-arms front/rear BNIP. If you have any questions, I'll be more than happy to help. I'm looking to get $450 plus shipping (flexible). Here's a list of what you get:


-Traxxas Slash 4x4 Buggy
-Original electronics, all working, fully waterproof
-Turnigy 4000mAh 2S Lipo (x2)
-Traxxas 3000mAh NiMH 8.4v 7cell
-Thunder AC6 (LiPo, LiFe, NiMH, NiCd) charger/balancer
-Losi Aluminum Hex Drivers
-Dynamite Wheel nut driver
-STRC Aluminum Shock towers (Front, Rear)
-STRC Bearing carriers (Front, Rear)
-STRC Steering Hubs
-Extra Screws, and shock parts
-Original tools
-2.4GHz radio system
-Proline SCT Badlands on Split Six wheels
-Traxxas Slash 4x4 stock wheels/tires
-RPM Front Bumper
-RPM A-ARMS (front/rear)
-Traxxas Revo Wing Mount
-Losi 8ight wing mount
-Proline 1/8 High-downforce wing
-Traxxas Slash 4x4 body Black/Red
-JConcepts Losi 8ight-e body
-Traxxas Sway bars
-Losi Springs Green front/rear
-Losi Springs Blue Front/rear
-Traxxas Progressive rate springs Front/Rear (stock)
-Losi Shock oil (30wt, 40wt, 50wt)








Thunder AC6, and stock body not pictured.

*No trades, No parting out*

Last edited by NitroFinatic93; 11-23-2012 at 06:57 PM.
NitroFinatic93 is offline