R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 11-15-2012 | 10:42 AM
  #24097  
Bob Barry
Tech Champion
iTrader: (22)
 
Joined: Jan 2003
Posts: 8,616
From: New Jersey
Default

Originally Posted by caprezmikeb
Sorry for the misunderstanding. My car pushes like crazy I looking to get more steering.
No problem!

Follow my same advice. Put the Cav Nats setup on BUT change the 3 deg of inboard toe to 2.5 deg of inbord toe. Don't make any other changes until you have run the car a few times that way.

I suspect the reason you feel the push so much is your car is too locked in and just won't rotate. Basically you are "steering from the rear" which you don't want.

Since A towers make the car feel more locked in, I don't think you should change to them. The C Towers will allow it to rotate.

Lessening the toe will also allow you to rotate more but since you will have more consistent traction through out the entire turn, you won't feel like you are super loose. You just have to be a little careful if there are loose sections on the track because you are now freeing up your rear some.

These changes are gradual, so you won't have to relearn how to drive.
Bob Barry is offline