Originally Posted by
Xenolance
+1
This is why I suggested the wider Hex's initially instead of the washers. Isn't there two different sizes of VTA wheels allowed now, one being slightly larger? Not to mention, most VTA bodies are 200MM instead of 190, so the +.75 or +1.0MM hexes would push the wheels out to make it look better with a 200MM body.
With the spacers I used to make the tires stop rubbing, it increased the width by 1/16in or about 1.5mm. The hex itself is about 3/16in or 4.75mm wide. I'm thinking 6mm wide hexes would be about right.