Weird issue: I swapped to new front arms, then started having steering issues. I thought it was electrical, swapped a servo and then an esc. Went to refill and rebuild the shocks, when I noticed that at half-full droop, the bottoms of the steering knuckle arms are seriously rubbing the edge of the suspension arms. Options were to grind some plastic, crank out all the negative camber, or limit droop. I added about 4-5mm of internal droop limiters, and 1 turn out on the turnbuckles. Now it clears, but droop is hurting.
I want to drive it once or twice to see how it feels (curiosity), but I think I gotta dremel. Anyone else experienced this?

PS, I loved it with the CF hub extenders and 3mm under the rear inner bs on indoor clay. No traction rolls, kinda slidey, but not loose. Took it off to try it the old way again...this is with STRC .5 hubs.