Originally Posted by
Zachfeen
Quick question guys, I raced my SCTE for the first time yesterday and did pretty well. I solved the turning issue I was having with some new tires and changing diff fluids. Now I have another issue, the track i race on is a tight, indoor clay track and at the end o the straight there is a sweeper, and my truck traction rolls on it everytime unless I slow down a ton, other tracks can get through it quite a bit faster. WIll tightening the swap bars help out here so it will slide rather than body roll over and then traction roll?
Tightening the sway bars is effectively disabling them while acting as having stiffer springs. You should rather install a heavier set. You can also lower ride height, change inner camber link position or use different tires (or cut the outside of your current tires)