R/C Tech Forums - View Single Post - Palmaris engine thread
View Single Post
Old 10-07-2004 | 02:37 AM
  #1017  
tl2111's Avatar
tl2111
Tech Master
iTrader: (21)
 
Joined: Mar 2002
Posts: 1,600
From: Love 1/8th
Default Re: Re: Re: ROAR 12 Regionals

Originally posted by Top Gun 777
Thanks a lot Walter.
I know in OZ on their nationals were using 2 engines with Palmaris Racing p/s sets but so far I have no detailed report of performance. If any eyewitness can make any coments for those engines. I know one of them is NS12 and other old RB.
Both engine had been performance well, engine with the NS case perform exceptionly good, on path with any top engine or better out there. the other is on S3 case only lag a bit of bottom end only. Both engine were using 16% nitro with 7TC plug and .2mm head shims in it and running at 120-130c, no sign of losing power during the 20mins semi final at that temp, unfortunately both of us in the same semi final and we have problem to both of us, I have clutch problem which I cannot accelerate at all, lost the final right at the start, and the other car have a early crash with other car lose a lot of time, so we end up 5 and 6 in our semi. beside the car and luck, engine havent have any hickup at all doing very well, thanks Edward. O.... no mod on P/L set(standard)

Last edited by tl2111; 10-07-2004 at 02:45 AM.
tl2111 is offline