Well, my build is done. Just need electronics now. Had only a couple hiccups, I'm really impressed. Most of the hiccups were my own stupidity (or following wrong instructions). Nothing that required replacement parts thank goodness. Only kit problems I had were that somehow two screws were missing (thankfully I found suitable replacements) and I learned that the inner camber link ballstuds for the FT do NOT work with the WC vertical ballstud bearing caps. They work in the outermost hole, but any other hole is going to interfere with the bearing carriers, and even in the outermost hole they are a little too long for my taste; I have some AE 3.5mm TiN ballstuds on the way.

Everything is out of the box except:
AE Gear Diff in front
WC Bearing Caps
WC Shock Towers
RSD Silicone Bladders
RSD 3mm Silicone O-Rings
RSD 1.5/1/1 Delrin Pistons
RSD Belt Tensioner/Battery Spacer
RSD Fan Mount
RSD Lipo Tab System
RSD Tuned Spring Set (not installed, just stock springs for now)
A-Plus Spring Steel CVDs all around
Zeppin Spring Steel Gear Diff Outdrives all around
Spec-R Rear Belt

For electronics I'm planning:

Team Orion R10 Pro ESC
Team Orion VST Pro Stock 17.5 motor
Savox SC-1267SG Servo
Airtronics MT-4 radio setup