Originally Posted by
drtdvl4
Question for J_Bone: I am running the RPM Bypass system and set it up like you recommended in an earlier post (rebound; yellow avid, Losi 40 wt front; red avid, Losi 37.5 wt rear). I am getting little to no body roll. Did I misunderstand this setup? Any advice? I'm thinking of going to the AE 12mm shocks, but hate to give up my new investment in the bypass setup. I just can't seem to throw the truck into the corners like I could before going to the bypass setup. Also any kind of braking wants to swap ends. TIA
You running the RPM or MIP? I think you meant MIP. If so, Try 35wt.(yellow springs) in the front and 30wt (try Batch 1 yellows or batch 2 red) in rear. That heavy weight in front was to accommodate for summer heat (110*F) and the MIP piston which is equal to AE#2. But with cooling temps, go with 35wt. Plus, shock location is critical. If you move the shock out, it will require less wt. oil.