Originally Posted by
poop
yup for the nats.
i hope a firmware update will fix my problem or if no one else has an issue, maybe it's just me and my usual luck with electronics.
I was running very conservative settings too:
Dualsky Z5 4.0
Lowest end bell timing 7*
DRRS 4
Hybrid 30%
150K
start 8000rpm
0.2 delay
FDR 8.8
Check post 10145 and 10157,need to lay your fan on the side,worth 20 degrees less for the esc.
See post and check the pic.
Hope this helps.