Hey guys, back from Canada race at Lou's speedway. Race was "interesting", due to the fact my first qualifier was my practice.... The car was very balanced and fast! Very predictable and was able to drive it hard when I needed to. Anyway this is what I came up with for Tq!
Front:
Front shock tower on top / 3rd hole from inside with 1.5 shim behind shock
Front bottom shock position / outside
Front spring orange 3 hole piston with 600 cst
Front short wheelbase/ 2 .1 shims under all suspension blocks
White front sway bar
1.5 front camber
Stock camber link location
Rear
Rear shock at top/ leaned all the way in
Rear shock at bottom/ outside
Rear spring / green with 3 hole piston with 350 cst
Red rear sway bar no rear shims under suspension blocks
Camber left rear 2, right rear -2.5 ( there was a right hand turn in the middle of track that had no grip yet and the car pushed there unless you hit brakes, I don't like brakes so this rotated the car through this section)
Camber link/ short on hub/ and 2 hole on inner link location, stock shims
Wheel base long.
2.5 rear toe
Droop 2mm over ride height all around car
If I didn't mention it that means it was stock location .
Body was Mazda speed 6 /with 2 middle holes in wing open.