Originally Posted by
Mxer59
I'm getting back into it after a little time off.
I had a Sc10 4x4 for a little while but never really experemited with tuning it.
I had the FT manual specs.
I was curious has a setup they can post or a setup sheet I can download?
I will be running Exotek chassis in saddle pack config. So I know shock weights and springs will be different, track condition is Med to Low bite outdoor will likely run +3mm wheels.
Thanks if anybody could help me out or add anything else I may need.
I would recommend that you pick up the M2C rear toe block. Using the rear toe block setting of 3.5 degrees really helps the truck in the low bite outdoor conditions I run on here.
The RC Shox Center diff also shines in low bite conditions from what I have experienced. Worth the money in my opinion but if you do want to stick with the slipper setup, I would suggest going with whatever is recommended for diff oils stock, I think thats 20 or 30K front, 5K or 7K rear. if you do the center diff, for oils I am really liking 7K front and 5K rear pretty much everywhere. Some even run a square setup of 5K all around.
RC Shox dual stage pistons also work REALLY well on bumpy stuff.
I do have a setup from the conditions I ran on that I liked I can provide you with if that would help. I posted it on here but if you can't find it let me know.
Originally Posted by
tom2tone
Just of out curiosity... Those of you running the exotek chassis, how many still have the chassis brace installed?
Anyone try this on say carpet and can report back the differences they felt as well as how they liked it?