R/C Tech Forums - View Single Post - SC10 Thread Part 2
Thread: SC10 Thread Part 2
View Single Post
Old 10-05-2012 | 09:42 AM
  #1361  
sparkwraps's Avatar
sparkwraps
Tech Master
iTrader: (34)
 
Joined: Dec 2010
Posts: 1,126
Default
Originally Posted by J_Bone
No, I kind of went with my own setup based on my current setups.
Front: 35wt AE oil, 5 limiters, 1.5 piston & Avid yellow spring (3.48 lbs.) with short cups.
Rear: 30wt. AE oil, 1 limiter, 1.6 piston & Avid yellow spring (Batch 1 @ 1.99lbs.) with medium cups.

I did use the shims that were provided because I didn't want to shave the towers. The shims actually move the springs away from the camber links with no ill effects.
At first I thought the front felt way to soft, but went ahead and tried it. Nope, they were perfect. These things sucked up the bumps and were so plush on flat landings with no bounce.

Much appreciated.

For those that don't have the AE or Avid springs - TLR big bore springs fit nicely and to mimic this setup, or even AE's the TLR Silvers are 3.4in/lb and the TLR Yellows are 2.0in/lb.
sparkwraps is offline  
Reply