Originally Posted by
gamedog1966
Thanks Borack and cnt wait to see em, I have a tuning question guys. My setup is this
40wt ft oil
Piston 3
Losi 22t green spring
6 limiters
30 mm ride height
Inside on tower
Outside on arm
Link inside 2mm washer on tower
A hole on caster
30 deg caster
Knuckle with washer under
1/4 oz in ft triangles
30wt oil rear
Piston 2
Losi bb 22t white
29mm ride height
3 limiters
4th drill hole on tower
Inside on arm
3 onboard toe
.5 deg hub
Shaved ubrace/ c hub
3oz under batt foam/ ballast under tranny
Med wheelbase
What I'm trying to accomplish here is to eliminate some more of that body roll, I took away some by moving the ft shocks out on the arm and going from piston 1 in rear to #2 and that helped but I wnt to take out more and also gain a lil bit more rear traction when I punch it out of corners. Can I get a lil tuning help from the gurus? Lol
Hey Dog,
You can try 3mm on the front camber link. Highlighted in red in you quote. If your in a testing mode, try moving that same ball stud to the out side hole on the shock tower to give it a shorter camber link. Just something to try. Note how it feels and see if it will help or not.
The rear had a huge effect on the truck as well. I've made some changes in the rear that made it more stable but loose. It's kind of a trade off.
I've been playing around with setups lately and they I'm pleased with the results. Some times they work, sometimes not.