R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 09-30-2012 | 05:20 PM
  #21296  
Jason Snyder
Tech Fanatic
iTrader: (4)
 
Joined: Oct 2010
Posts: 948
Default

Originally Posted by mxracer458
Jason did you notice the car chassis slapping a lot with the 56 pistons?did you notice a huge difference then the #2 pistons?
Thanks
John
You know in a few instances it was definitely slapping.....but the two main jumps are pretty big and the downsides are pretty flat for as much air as you get....if I landed the car pretty much parallel to the downside surface usually it was pretty smooth and settled.

A huge difference? Nope....noticeable, yes. The #2's felt good. Right now I'm at 32.5 front and 27.5 rear....I'm gonna try 35/30 on Wednesday. Car is pretty dialed but seems like the chassis rolling a bit to fast.

So besides oil I may try a longer front camber link and a different front spring.....I tested some some V1 gold barcodes this weekend..... No comparison between my Losi Pink BK Bars with red AKA insert and my JC Gold v1 barcodes w/ red AKA insert........BK Bars were dominant...I even took the barcodes out in the parking lot and tried to wear em down a bit. Still the BK bars were much better.
Jason Snyder is offline