Having listened to many of you guys, I've started to simplify things a bit.
Here is a start that will address the dual bellcrank steering as well as bumpsteer.
It is a shorty pack conversion that will move a few things around but keep all the stuff related to the bulkheads and motor mount as they are.
Here is a list of new parts that will need to be added:
1) Chassis plate 2.5mm 75mm wide
2) Top deck 2.0mm (still pondering a bridge from front bulkheads to Steering posts)
3) Dual crank steering assembly
3) Strap down battery stay brackets.
4) Single point servo mount
5) CF rear belt side brace W/fan mount