Hi guys,
Finished up the build with the exception of the shocks. I have been waiting for the 4 hole tapered pistons I ordered from Nick, but figured I might as well get it set up with the stock stuff so i can at least run it. Can someone recommend which stock pistons to start with (front and rear), and a good starting place for the oil? Most of the setup sheets I've seen are using the 4 hole variety. Rather small, technical dirt/clay track; mostly small jumps. Pretty much stock set-up except for different springs (as recommended here for the RM3 config) Will be using a shorty Lipo as well.
Thanks all!
SoCal