Hello everyone,
I am having a small driving issue with the s411 since the begging, i have a lack of on throttle steering on the exit of the turn. I have tried almost everything I can think, and maybe it's driving fault, so i need help.
I run 10.5 justock ratio 5.0, Vtec 30X tyres in asphalt
S411 first units (2.5 main chasis, 2.0 top deck) Original steering rack.
Front:
1º camber, ff2 (+1mm spacer), fr1 (2mm spacer), downstops 6mm, ride height 5mm, 1.4mm antiroll bar
inner shims 2.5mm, outer shims 0
450 cst, 3 holes, orange spring, position #3
Rear:
2º camber, rf0 (no spacer), rr2.5 (0.5mm spacer), downstops 4mm, ride height 5.5mm, 1.2mm antiroll bar
inner shims 3mm, outer shims 2mm
400cst, 3 holes, yellow spring, position #5
I have tried, in the front spool, 500k, and 200k, and in the rear 1k, 1.2k and 3k.
I am using protoform P37
I know that for a stock class I should use spool in front, but I am stuck with gear diff to avoid wear in the cups.
I have in mind buying the felx deck, but I donm't know if it will help.
Any tips??
regards