R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 09-25-2012 | 10:40 AM
  #21082  
micrors4guy
Tech Elite
iTrader: (50)
 
Joined: Nov 2003
Posts: 3,595
From: Covington, La.
Default
Originally Posted by FLHX1550
Just something to point out

My B4.1 FT with a Futaba 614FF Receiver, Viper VTX10R-BE (heavy speedo), Viper VST8.5 motor, Savox 1257TG Servo, 1/2 Oz next to the receiver, 1/4 oz under the servo, with the FT weight, Venom 3800 Shorty, JCon Hexs, JCon Mono Wheels with JCon Rips / +1 Foams, JCon Hybrids / +1 Foams, stock body, stock wing, JCon Wheel Nuts, MyLaps Transponder comes in at 1500grams on the money. (1gr over limit)
I will have to re weight mine but im a good bit under that with the differance being i have ti screws and am not running hex wheels. I believe mine came in at 1460g and that is with ft balast 1/4 th in each rear corner 3/4 in the batter tray behind the servo, 1/2 in front of the servo and 1/4th in the noise of the buggy.
micrors4guy is offline  
Reply