R/C Tech Forums - View Single Post - Truggy set up question (Hudy)
View Single Post
Old 09-25-2012, 12:23 AM
  #2  
kaan
Tech Regular
 
Join Date: Jul 2011
Location: Denmark
Posts: 283
Default

Originally Posted by Precision1
So I have a Hudy station and it calls for using a 30mm block under the chassis when setting everything up.

Is this (30mm dimension) based on a buggy? Since the trug has bigger wheels, and more ride height, should I be using a taller block when setting it up?

I know it is not a huge deal, but might as well do it right if you have the right tools! I work with 0.0005" all day long and tend to get a bit "precise" with the RC.
30mm block should be fine as long as it raises the chassis up far enough so that nothing touches the setup board.

The important part is that you use the same repeatable steps when using the setup kit.

Also, using 30mm blocks matches the droop gauge from hudy.
kaan is offline