yes, the holes in the front seemed bigger. I put a little black grease on the pin to keep it from falling out while I put the hex on. hopefully it keeps the pin in place when I remove the hexes.


ok, so I wanted to make the truck more forgiving. It was too loose in the rear last weekend. So I went from blue to red springs. move the front shock tops and bottoms in and added 2 shims to the rear stud. I also went from 5 deg hubs to 1.5 deg hubs. I removed the rear sway bar as well. Didi I go too far or sound about right? btw, I bought it used with the sway bar, tried it for giggles, I have a feeling is was crap on a low bite track.