RX/TX would be a good place to start...if you can borrow from someone you know and try out their gear that would help. I do have a RX/TX from the AE SC10 4x4 that my brother in law is selling for $55 shipped i believe if u really need something
Also check temps, is the ESC hot, is the motor hot...how bout the wiring?
Originally Posted by
Gene158
Damn man you got me worried now. I just bought a ten scte and ordered the sc401 4600kv and HW sct pro. For batteries, I ordered some 2s 6000mah 65-130c nanotechs. I was planning on using a 14t or 15t pinion. You think I'll have any issues with that setup?
i have the HW SCT Pro and HW 4700kv motor with 13t pinion and with my set-up i have yet to puff or get the batteries even warm so as long as your solder job is good and you dont have a bunch of resistance from connections you should be solid. If you can have the wire come out of the esc and put the bullets on the wire and get the batteries with the bullet connections in the pack and not direct wired. I have the cheap duratrax bullets and they work fine but people also like the CC bullets but get the longest ones you can that will fit in your pack...i have the 6.6 nano's with the 65-130c rating and love them, i think you will to!