Originally Posted by
Wildcat1971
are you running the 4.1 stock tower or the carbon tower? some batteries wont fit under the carbon tower, because it was not upgraded for lipos. if your talking about the front thump/twist screws. all batteries are not the same height. some have thicker cases, some of the higher mah packs are a little taller. if you want to run your carbons, adjust the twist screws for the carbons and run those.
He could mod the battery hold down. Move the battery forward drill 2 holes in the back of the hold down and bolt a drop down onto that protruding that under the shock tower. If that makes sense at all.? I did it with my T4 running 8000 MAH maxamps for a stock endurance race. I cut about 3/16 of the hold down off to make it even with the shock tower if I remember correctly, it helps to have a broken top plate for a B44.