Originally Posted by
SourDieselX
It's been awhile and I'm sure there are other sub forums where this is discussed, but for those who have this eb48, what Lipos are you using, I'm going to be running a RX8 w/ Tekin 1900kv, looking for a good 4S, so i'm curious what everyone else is using.
same motor and esc w/ thunder power 5300mah 65c 4s........bit expensive but awesome. running 18 tooth pinion with 80% current limit. coming off of 10 min main around 170-175 degrees. im sure once i start learning it and driving harder ill need to take limit down a bit. maybe to 74-76%. i like seeing my motor around 160-175ish. tekin doesnt like seeing their motors above 180. i will say watch how long you practice tho....i wouldnt go over 10 min cuz ive seen my motor get pretty hot after 12-15 min. if your mains are longer then 10min then obviously turn limit down or gear accordingly......im just a rookie that reads alot of forums etc to learn more.... and thats my 2 cents