Originally Posted by
oggietiu
Good tip on the Spur, however I have the 8.2 so its a 46T. I think it will hit the top plate, Although I know u can grind it a bit to get clearance. My problem is the gearing now. I am running 15/44 now. SO using 46T would I increase pinion size to 17T?
46 will hit the top plate if you don't grind it. I just happen to have a 44t spur, so I figure I would try it out, and it worked nicely. And you would need a 16/46 as opposed to the 17 to keep roughly the same gear ratio as the 15/44.