Originally Posted by
napoleon1981
For the hole that fits the antenna holder on the floating mount there is no screw hole in the standard lower deck. You can 1) drill a hole in the chassis or 2) take a droop set screw, grind of 3-4mm and thread this in the servo mount so you can put the antenna holder on. I did option 2.
It probably doesn't matter but you have it mounted incorrectly. The 3rd hole in the mount is in front of the other two, so on the standard deck you use the two rear holes. I lined up the two chassis to check btw.
The mount also brought my servo forward by about 1mm and it hit the wiper arm so I had to sand my servo case a little so the rack would move freely