Originally Posted by
easye
Hopefully before Trackside specktrum race at the end of october. Other wise setup sheets posted are useless. Can you post sizes of the bars by the color.
White = 1.0mm
Yellow = 1.2mm
Pink = 1.5mm
Originally Posted by
Fabulous
Everyone having issues with the ball cups popping off I have a fix for you.
http://www.amainhobbies.com/product_...nd-Servo-Saver
Since removing the servo saver from the steering rack from the old design on the xxx platform, this has been a known problem from day one with the steering rack on the new 22 platform. Not as bad with the 22 buggy since it has smaller lighter front tires. It's been an issue with the 22T and now the 22SCT. This is nothing new to TLR they just havent come up with a solution.
The lack of a servo saver is not the issue.
Originally Posted by
xlayedoutx
The kit hexes will work fine with Ten-SCTE wheels, no other hexes are required.
Originally Posted by
B00t13g
Where is everyone measuring their ride height? 29mm is higher than I set my 1/8th scale.
Yes, it really has to do with the bone and arm angles based on the diameter of the tire. Since SC tires and the same diameter as 1/8th (more or less), then the ride height is in the same range as well.