Originally Posted by
bds81175
Now this is just my opinion....I'm not a big fan of timing. I'm not sure what the initial timing of the Ballistic 10.5 is but I would lower your timing and gear up. My brother runs a Ballistic 10.5 on his SC10 on a big track and has had good success with it without advancing timing. I would gear up until you hit top speed at the end of the longest straight and then check your temps after about 3 minutes.
Thanks for the reply and the suggestion. Fortunately, I've got a lot of pinions in the 20T range. I'll drop timing back to 30 and see where it goes. I'm half tempted to drop in an 8.5 stator and call it a day
Thanks...