Originally Posted by
SC Shaun
I did that as well, but you can't reasonably get 80grams in the front that way. That's 11-12 of the 7g bricks stacked up. I stacked 2x2=1ounce/24g and they fell out on the first run. had to drill holes and ziptie them in. Looking at it, getting 80 in there is going to be a mess.
i got 82g on my front.... 12 7g blocks, 6 on each side.
if you leave them in pieces of TWO you can run 3 stacks of TWO. and heat shrink them and they stay together well, plenty of clearance. and because heat shrink and ca bond to the plastic chassis very well, they stay forever, to get them off you need to put alot of pressure with a flat blade and the heat shrink actually rips to get the weight out, and then i use a dremel to clean it up, and also use some 250 grit on the chassis where i mount them so it lets it "grab" better before even mounting them.
pics:
