Sure. I am basically running Rick Hohwart's asphalt setup from March this year with slight changes to fit my mid size home track (60 x 40). Also because i am running a TC6. Here is his setup.

http://www.petitrc.com/reglages/asso...401/index.html

The changes I made are as follow:
FRONT:
shock position: 3B (TC6 arms)
outer ball and shim: black 1mm
anti roll bar: silver (TC6 roll bar)
springs: RSD yellow

BACK:
wheel base: 2mm
shock position: 3B (TC6 arms)
anti roll bar: black (TC6 roll bar)
springs: Tamiya yellow
differentials: ball diff

I was running blinky 17.5 (3.5 FDR) on a medium grip asphalt track. slightly bumpy. used Sorex 32 tires. The characteristic of this setup is that it pushes a little going into corners. has good traction mid corner. And then it provides excellent exit corner steering and grip. It's very easy to drive consistently lap after lap.

I tried roll center 2A in the front and 3A in the back, and also 3A all around. The car had less traction comparing to 3A front 0B back. So I went back to that setting.

I would like the car to have a little more steering going into corners. I tried different things but nothing worked as I am not really good at setup. If someone here tried Rick's March Asphalt setup and have figured something out. Please let me know.