R/C Tech Forums - View Single Post - SC10 Thread Part 2
View Single Post
Old 08-15-2012 | 06:07 PM
  #727  
gamedog1966's Avatar
gamedog1966
Tech Addict
 
Joined: Mar 2011
Posts: 550
From: Tacoma, wa
Default

Originally Posted by 07Forester
I'm sure anyone who races with me can vouch for how well I maintain my cars.

There are really only three parts where the truck is pushing enough to concern me. First is on the first turn which is a 180 right. Second is a small, higher speed sweeper and lastly there is a 150* turn right after a tabletop which makes the truck swing wide.
U can lower ur ride height a little too, it dnt show where ur ft shocks are on the tower, try all the way inside. Lenghten ur wheelbase. Try a littlw toe out in the front no more than 1 deg, stiffen the rear oil a tad, before u make changes check to see if your diff is too tight if so u can push like a tank. And when tuning make one adjustment at a tikme and test to see if headed in the right direction bro n good luck
gamedog1966 is offline