Originally Posted by
racer x 1
has anyone seemed to notice that this car likes a higher rollcenter than other cars? ive gone through numerous set up on Petitrc.com and rc10.com and for the most part even in low bite situations more often than not the drivers ran 0B arm mounts or something close to this. now from my experience a lower roll center will allow the car to roll more and have more grip so how could it be that in low bite most ran such a high roll center for the lower arm mounts
a few of the other fast guys have been trying to guide my in the right direction for my set up but my car is still not carrying the corner speed I would like it too. could a " higher" roll center theoretically allow the car to carry more speed? Sorry im kinda thinking out loud and looking for some input I just found this odd.
Originally Posted by
Jochim_18
Yes TC6 seems to like running higher roll center specially on the rear.. Car likes shorter link... I tried running it with lower roll center like what the pro was running at the REEDY race this year car was horrible...
I posted
Juho's Worlds Setujp featuring 3B arm mounts all around. Can;t get any higher than that.
For some reason the high roll center works better. We accidentally discovered this with the TC5 back in 2008 and have been running high until recently where we have tried to run lower settings thinking that this is the way it should be. But higher consistently runs better on AE cars so even if it does not seem right, it works.